MX-5 Miata L4-2.0L (2008)
Type C Installation
NOTE:
-
If the quick release connector O-ring is damaged or has slipped, replace the piping component.
-
A checker tab is integrated with the quick release connector for new fuel hoses and evaporative hoses. Remove the checker tab from the quick
release connector after the connector is completely engaged with the fuel pipe.
CAUTION: Be sure to replace the retainer with a new one to prevent gas leakage.
1. Install a new retainer to the quick release connector.
2. Reconnect the hose straight to the pipe until a click is heard.
3. Lightly pull and push the quick release connector a few times by hand, and then verify that it is connected securely.
Type D Installation
NOTE
-
If the quick release connector O-ring is damaged or has slipped, replace the evaporative hose.
-
When replacing with a new evaporative hose, disengage the release tabs from the join port.
-
A checker tab is integrated with the quick release connector for new evaporative hoses. Remove the checker tab from the quick release
connector after the connector is completely engaged with the joint port.