MX-5 Miata L4-2.0L (2008)
6. Disconnect the TR switch connector.
7. Verify that the continuity is as indicated in the table.
^
If there is any malfunction, adjust the TR switch.
8. Reinspect for continuity at TR switch.
^
If there is any malfunction, replace the TR switch.
9. Connect the TR switch connector.
10. Install the insulator.
Tightening torque
8 - 11 Nm (82 - 112 kgf-cm, 72 - 97 in-lbf)
11. Install the middle pipe.
12. Install the tunnel member component.
13. Connect the negative battery cable.
14. Install the battery cover.
