mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Air Bag(s) Arming and Disarming|Service and Repair|Page 5242 > < Seat Occupant Classification Module - Air Bag|Service and Repair
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair

AIR BAG SYSTEM SERVICE WARNINGS

Air Bag Module Inspection

-

Inspecting an air bag module using a tester can operate (deploy) the air bag module, which may cause serious injury. Do not use a tester to inspect
an air bag module. Always use the on-board diagnostic function to diagnose the air bag module for malfunctions.

Air Bag Module Handling

-

Before removing the air bag module or disconnecting the air bag module connector, always turn the ignition switch to the LOCK position,
disconnect the negative battery cable, and then wait for 1 min or more to allow the backup power supply of the SAS control module to deplete its
stored power.

-

Handling a live (undeployed) air bag module that is pointed toward your body could result in serious injury if the air bag module were to
accidentally operate (deploy). When carrying a live (undeployed) air bag module, point the deployment surface away from your body to lessen the
chance of injury in case it operates (deploys).

-

A live (undeployed) air bag module placed with its deployment surface to ground is dangerous. If the air bag module were to accidentally operate
(deploy), it could cause serious injury. Always place a live (undeployed) air bag module with its deployment surface up.

Side Air Bag Module Handling

-

When a side air bag module operates (deploys) due to a collision, the interior of the seat back (pad, frame, trim) may become damaged. If a side
air bag does not operate (deploy) normally from a seat back that has been reused, a serious accident may result. After a side air bag has operated
(deployed), always replace both the side air bag module and the seat back (pad, frame, trim) with new parts. After servicing, verify that the seat
operates normally and that the wiring harness is not caught.

Seat Weight Sensor Handling

-

The passenger-side seat and the seat weight sensor may become deformed or otherwise damaged due to operation (deployment) of the front or side
air bag in an accident. This may cause the passenger sensing function to operate improperly and result in a serious accident. Always replace the

Air Bag(s) Arming and Disarming|Service and Repair|Page 5242 > < Seat Occupant Classification Module - Air Bag|Service and Repair