MX-5 Miata L4-2.0L (2008)
3. Turn the ignition switch to the ON position.
4. Confirm that the DSC indicator light illuminates and that the DSC OFF light flashes.
5. Turn the steering wheel to full right lock, then turn it to full left lock.
6. Confirm that the DSC OFF light goes out.
7. Turn the ignition switch off.
8. Turn the ignition switch to the ON position again, and confirm that the DSC indicator light goes out.
^
If the DSC indicator light does not go out, disconnect the negative battery cable, and perform the procedure again starting from Step 2 shown
above.
9. Drive the vehicle for approx. 10 min, and confirm that the ABS warning and DSC indicator lights do not illuminate.
