MX-5 Miata L4-2.0L (2008)
10. Set the adjustable wrench as shown in the figure to hold the manual shaft lever.
11. Remove the manual shaft nut.
12. Remove the washer and manual shaft lever component.
13. Loosen the TR switch mounting bolts.
14. Temporarily install the TR switch mounting bolt.
Caution:
^
Improper adjustment of the TR switch will cause abnormal operation of the automatic transmission. Be sure to adjust the TR switch
correctly.
15. Verify the TR switch reference line and the notch of the manual shaft are aligned.
16. Tighten the TR switch mounting bolts.
Tightening torque
9.8 - 15.7 Nm (100 - 160 kgf-cm, 87 - 138 In-lbf)
