MX-5 Miata L4-2.0L (2008)
13. Remove the O-ring from the coupler component.
14. Install a new O-ring to the coupler component.
15. Tighten the coupler component mounting bolt to the transmission case.
Tightening torque
3.9 - 6.9 Nm (40 - 49 kgf-cm, 35 - 42 in-lbf)
16. Install the TFT sensor and the lock plate with the bolt to the control valve body component.
Tightening torque
8.0 - 12.0 Nm (82 - 122 kgf-cm, 26 - 42 in-lbf)
17. Connect the coupler component to the clamps.
18. Connect the solenoid connectors to the solenoids.
19. Coat a new O-ring with ATF and install it to the oil strainer.
20. Install the oil strainer with the bolts to the control valve body component.
Caution:
^
Pay attention to the fabric so that foreign materials from it cannot comes out in the transmission.