MX-5 Miata L4-2.0L (2008)
2. Remove the holder using the SST.
Steering Rack, Oil Seal (Holder Side) Disassembly Note
1. Install the SST to the gear housing.
2. Remove the steering rack and oil seal (holder side) using a press.
3. Remove the oil seal (holder side) from the steering rack.
Oil Seal (Gear Housing Side), Inner Guide Disassembly Note
1. Set the SSTs as shown.
2. Install the SST to the gear housing.
3. Remove the oil seal (gear housing side) and inner guide using a press.
Mounting Rubber Disassembly Note
^
Press the mounting rubber out from the gear housing using the SSTs and a press.
Steering Gear and Linkage Assembly
STEERING GEAR AND LINKAGE ASSEMBLY
Caution: Place copper plates, rag, or similar material in a vise, when securing the mounting bracket portion of the steering gear.
1. Assemble in the order indicated in the table.