MX-5 Miata L4-2.0L (2008)
2. Remove the bushing using the SSTs.
Bushing (Front Side) Removal Note
Caution:
^
Be careful not to damage the front lower arm. If it is damaged, replace it.
1. Cut off the stopper plate rubber using a razor.
2. Cut off 5 - 6 mm (0.20 - 0.23 in) from each side of the knob end of the bushing using a hacksaw.
3. Remove the bushing using the SSTs.
Bushing (Shock Absorber Lower Side Connecting Part) Removal Note
Caution:
^
Be careful not to damage the front lower arm. If it is damaged, replace it.