MX-5 Miata L4-2.0L (2008)
Rear Axle Component Removal Note
Note:
^
When removing the ball joints, the rear knuckle bushings may also come off. If they come off, replace the rear knuckle.
1. Support the knuckle using a jack.
2. Using the SST, disconnect the rear trailing link (upper) ball joint.
3. Remove the rear trailing link (lower) outer bolt.
4. Using the SST, disconnect the rear lateral link (upper) ball joint.
5. Using the SST, disconnect the rear lateral link (lower) ball joint.
6. Remove the toe control link outer bolt.
7. Remove the shock absorber lower bolt.
8. Remove the rear axle component.
Rear Crossmember Component Removal Note