MX-5 Miata L4-2.0L (2008)
Caution:
^
Take care as the C-2 and B-3 accumulator piston may eject.
18. Apply compressed air into the oil passage as shown in the figure and remove the accumulator pistons (C-2, B-3) and the compression springs from
the transmission case.
Caution:
^
Do not to damage the accumulator pistons.
19. Remove the snap rings from the accumulator pistons (C-2, B-3) using a flathead screwdriver.
20. Remove the compression springs from the accumulator pistons (C-2, B-3).
21. Remove the O-rings from the accumulator pistons (C-2, B-3) using a flathead screwdriver.
Caution:
^
Take care as the C-3 accumulator piston may eject.
22. Apply compressed air into the oil passage as shown in the figure and remove the accumulator piston (C-3) and compression springs from the
transmission case.
23. Remove the O-rings from the accumulator piston (C-3) using a flathead screwdriver.