MX-5 Miata L4-2.0L (2008)
24. Remove the accumulator valve and compression springs from the transmission case.
Control Valve Body Installation
CONTROL VALVE BODY INSTALLATION [SJ6A-EL]
On-Vehicle Installation
Caution:
^
When installing the control valve body component, do not put the coupler component in the open space of the separate plate in the
control valve body component.
^
Do not pinch the coupler component between the separate plate and the control valve body component.
1. Install the accumulator valve and compression springs to the transmission case.
Caution:
^
Do not to damage the O-ring and accumulator piston.
2. Coat the new O-rings with ATF, and install it to the accumulator piston (C-3).
