MX-5 Miata L4-2.0L (2008)
Clutch Slave Cylinder: Removal and Replacement
CLUTCH RELEASE CYLINDER REMOVAL/INSTALLATION
Caution:
^
Fluid will damage painted surfaces. Be careful not to spill any fluid on painted surfaces. If fluid does get on painted surfaces, wipe it
off immediately.
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. Bleed the air from the system.
4. Inspect and adjust the clutch pedal. (See CLUTCH PEDAL INSPECTION/ADJUSTMENT.) See: Clutch Pedal Assembly/Testing and
Inspection/Clutch Pedal Inspection/Adjustment