MX-5 Miata L4-2.0L (2008)
Heated Glass Element: Testing and Inspection
REAR WINDOW DEFROSTER FILAMENT INSPECTION
1. Turn the ignition switch to the ON position.
2. Turn the rear window defroster switch on.
CAUTION: Directly touching the rear window defroster filament with the lead of the voltmeter could damage it. Wrap aluminum foil
around the end of the lead and test the rear window defroster filament by touching it with the foil.
3. Connect the positive lead of the tester to the positive side of each rear window defroster filament and the negative lead to ground.
4. Gradually slide the positive lead from the positive side to the negative side and verify that the voltage decreases accordingly.
-
If the voltage changes rapidly, the rear window defroster filament has a malfunction. Repair the rear window defroster filament.
