mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Interior Moulding / Trim|Console > < Strut Tower Brace|Service and Repair
Page 1
background image

Carpet: Service and Repair

FLOOR COVERING REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the seats.
3. Remove the dashboard.
4. Remove the heater unit.
5. Remove the front side trims.
6. Remove the rear package trims.
7. Remove the rear end mat.
8. Remove the seat belts.
9. Remove the footrest.

10. Remove the fasteners.
11. Disengage the tabs A from the body.
12. Remove the floor covering.
13. Install in the reverse order of removal.

Interior Moulding / Trim|Console > < Strut Tower Brace|Service and Repair