MX-5 Miata LS L4-1.8L DOHC (2001)
4. Remove the bolt and fastener.
5. Remove the cover.
6. Pull the quarter trim toward you, then disengage clips A and pins B from the body.
7. Slide the quarter trim to the front side, then remove it.
8. Install in the reverse order of removal.
Rear Package Trim
REMOVAL/INSTALLATION
1. Remove the quarter trim.
2. Close the convertible top fully.
3. Remove the fasteners.
4. Remove the rear package trim.
5. Install in the reverse order of removal.
Front Side Trim
REMOVAL/INSTALLATION
1. Remove the scuff plate.
2. Remove the fastener.
3. Pull the front side trim toward you, then disengage clip A and pins B from the body.
4. Install in the reverse order of removal.
Trunk End Trim
REMOVAL/INSTALLATION
