mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Idle Speed/Throttle Actuator - Electronic > < Recall - PCM Replacement for Emissions Standard Failure|Page 1526
Page 1
background image

Fuel Tank Pressure Sensor: Testing and Inspection

NOTE:  Perform the following test only when directed.

1. Inspect the FTP sensor for damage and cracks.
2. Inspect the vacuum hose for improper routing, kinks or leaks.

-

If the above are okay, perform the "Circuit Open/Short inspection".

3. Reconnect the FTP sensor connector.

-

If the above open or short circuit are correct, replace FTP sensor.

Circuit Open/Short Inspection

Open circuit

-

If there is no continuity, the circuit is open. Repair or replace the harness.
-

FTP sensor connector terminal A and PCM connector 4AB through common connector.

-

Reference voltage circuit (FTP sensor connector terminal C and PCM connector terminal 4L through common connector.)

-

GND circuit (FTP sensor connector terminal B and PCM connector terminal 4O through common connector.)

Short circuit

-

If there is continuity, the circuit is shorted. Repair or replace the harness.
-

FTP sensor connector terminal A and PCM connector terminal 4AB through common connector to GND.

-

FTP sensor connector terminal C and PCM connector terminal 4L through common connector to GND.

Idle Speed/Throttle Actuator - Electronic > < Recall - PCM Replacement for Emissions Standard Failure|Page 1526