MX-5 Miata LS L4-1.8L DOHC (2001)
c. Push the harness (PCM harness) installed to the brake pedal bracket toward the rear of the vehicle to expose the PCM bracket nut.
d. While moving the harness toward rear of vehicle, push the stay until it comes apart from the stud with the PCM installation nut.
e. Remove the PCM installation nut at the brake pedal bracket.
f. Remove the nut attaching the PCM bracket to the firewall.
g. Install in the reverse order of removal.
Tightening torque
Bolt, nut: 7.9 to 10.7 N·m (80 to 110 kgf·cm, 70 to 95.4 in·lbf)
2. Select repair procedures below according to how many valid keys were provided:
- Customer has 2 or more valid keys: REPAIR PROCEDURE I
- Customer has only 1 valid key: REPAIR PROCEDURE I
REPAIR PROCEDURE I - Customer has 2 or more valid keys
NOTE:
- Up to Eight (8) keys can be programmed to one vehicle.
NOTE:
