MX-5 Miata LS L4-1.8L DOHC (2001)
6. Select GENERIC OBD-II FUNCTIONS and press F the TRIGGER
7. Press Number 8 under CONT to continue the GENERIC OBD-II FUNCTIONS.
NOTE:
-
The following conditions cancel the ON BOARD DEVICE CONTROL function:
-
Ten minutes after the TRIGGER on the NGS tester is depressed.
-
When engine is started.
-
If the pressure in the EVAP control system exceeds 6.43 kPa {48.26 mmHg, 1.9 inHg}.
-
Therefore, the following tests, Steps 8 through 16, should be conducted under the following conditions.
-
Within 10 min after TRIGGER on NGS tester is depressed.
-
Ignition switch is ON, but is not started engine.
8. Turn the menu dial clockwise or counterclockwise to highlight the ON BOARD DEVICE CONTROL and press the TRIGGER.
9. Press CANCEL two times.