mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Liquid Vapor Separator, Evaporative System > < Evaporative Emission (EVAP) System Leak Inspection|Page 1779
Page 1
background image

Canister Vent Valve: Service and Repair

CANISTER DRAIN CUT VALVE (CDCV) REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Raise the rear of the vehicle and support it with safety stands.

3. Remove in the order indicated below.

1. Evaporative hose
2. CDCV

4. Install in the reverse order of removal.

Evaporative Hose Installation Note

1. Install the evaporative hose until it contacts the stopper.

Liquid Vapor Separator, Evaporative System > < Evaporative Emission (EVAP) System Leak Inspection|Page 1779