MX-5 Miata LS L4-1.8L DOHC (2001)
EGR Boost Sensor: Testing and Inspection
NOTE: Perform the following test only when directed.
1. Inspect the EGR boost sensor for damage and cracks.
2. Inspect the vacuum hose for improper routing, kinks or leaks.
-
If the above are okay, perform the "Circuit Open/Short Inspection."
3. Reconnect the EGR boost sensor connector.
-
If the above open or short circuit are correct, replace EGR boost sensor.
Circuit Open/Short Inspection
Open circuit
-
If there is no continuity, the circuit is open. Repair or replace the harness.
-
EGR boost circuit (EGR boost sensor connector terminal B and PCM connector terminal 4AE.)
-
Reference voltage circuit (EGR boost sensor connector terminal C and PCM connector terminal 4L.)
-
GND circuit (EGR boost sensor connector terminal A and PCM connector terminal 4O through common connector.)
Short circuit
-
If there is continuity, the circuit is shorted. Repair or replace the harness.
-
EGR boost sensor connector terminal C and PCM connector terminal 4L through common connector to GND.
-
EGR boost sensor connector terminal B and PCM connector 4AE through common connector to GND.