MX-5 Miata LS L4-1.8L DOHC (2001)
following procedure with the engine stopped.
1. Complete the "BEFORE REPAIR PROCEDURE".
2. Disconnect the negative battery cable.
3. Remove the dynamic chamber.
4. Remove the fuel injectors together with the fuel distributor.
5. Fasten the fuel injectors firmly to the fuel distributor with wire and connect the fuel pipe connector.
6. Connect the negative battery cable.
CAUTION: Connecting the wrong DLC terminals may possibly cause a malfunction. Carefully connect the specified terminals only.
7. Connect DLC terminals F/P and body GND using a jumper wire.
8. Turn the ignition switch to ON to operate the FP.
9. Tilt the fuel injectors approx. 60 degrees and verify that fuel leaks from the fuel injector nozzles is within specification.
-
If not as specified, replace the fuel injector
Fuel leakage
Less than 1 drop/2 min
10. Turn the ignition switch to the LOCK position.
