MX-5 Miata LS L4-1.8L DOHC (2001)
Fuel Pressure Pulsation Damper: Service and Repair
Pulsation Damper No.1 & No.2 Removal/Installation
PULSATION DAMPER NO.1 REMOVAL/INSTALLATION
1. Complete the "BEFORE REPAIR PROCEDURE".
2. Disconnect the negative battery cable.
3. Remove in the order indicated below.
1. Plastic fuel hose
(See Plastic Fuel Hose Disassembly Note)
(See Plastic Fuel Hose Assembly Note)
2. Pulsation damper No.1
4. Install in the reverse order of removal.
5. Complete the "AFTER REPAIR PROCEDURE".
PULSATION DAMPER NO.2 REMOVAL/INSTALLATION
1. Remove and install the pulsation damper No.2. (See FUEL INJECTOR REMOVAL/INSTALLATION.)