mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Recall - PCM Replacement for Emissions Standard Failure|Page 96 > < Recall - PCM Replacement for Emissions Standard Failure|Page 94
Page 6
background image

2. Perform a Warranty Vehicle Inquiry using your eMDCS System and inspect vehicle for a Campaign Label Recall 3505H attached to the vehicle's
hood or bulkhead. Refer to eMDCS System - Warranty Vehicle Inquiry Results table.

NOTE: Verify recall number as the vehicle may have multiple recalls.

B. REPAIR PROCEDURE

Before starting procedure:

OBTAIN ALL KEYS FROM CUSTOMER.

NOTE: If this procedure is performed and customer has additional keys that are not at the dealer, those keys will no longer start the engine.

1. Replace PCM:

a. Disconnect the negative battery cable.

b. Disconnect the connectors from the PCM installed on the upper part of the brake pedal.

Recall - PCM Replacement for Emissions Standard Failure|Page 96 > < Recall - PCM Replacement for Emissions Standard Failure|Page 94