MX-5 Miata LS L4-1.8L DOHC (2001)
1. Remove the pre-tensioner seat belt and connect the SST (Adapter Harness) to it as shown in the figure.
WARNING: If the pre-tensioner seat belt is not properly installed to the tire, serious injury may occur when the pre-tensioner seat belt is
deployed. When installing the pre-tensioner seat belt to the tire, make sure the module is facing the center of the tire.
2. Tie the pre-tensioner seat belt to a tire with the module facing the center of the tire. Wrap the wire harness through the tire and around the bolts or
nut at least 4 times.
3. Stack the tire with the pre-tensioner seat belt on top of two tires. Stack a tire on top of the three tires. Stack another tire that has a wheel on top of
the four tires.