MX-5 Miata LS L4-1.8L DOHC (2001)
1. Remove the dust boot using a chisel, being careful not to damage the ball joint and the arm.
Lower Arm Bushing (Front and Rear) Removal Note
1. Press the lower arm bushing out using the SSTs and a socket as shown.
Lower Arm Bushing (Front and Rear) Installation Note
1. Apply soapy water to the lower arm bushing.
2. Press the bushing in using the SST and a socket in the direction of the arrow.
Dust Boot Installation Note
1. Wipe the grease off the ball joint.
2. Fill the inside of the new dust boot with grease.
