mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Extension Housing, A/T > < Control Module, A/T|Testing and Inspection|Page 2258
Page 1
background image

Control Module: Service and Repair

TRANSMISSION CONTROL MODULE (TCM) REMOVAL/INSTALLATION 

1. Disconnect the negative battery cable.
2. Disconnect the TCM connector.
3. Remove the TCM.
4. Install the TCM.

Tightening torque 36 Nm (3.7 kgf-m, 27 ft. lbs.) 

5. Connect the TCM connector.
6. Connect the negative battery cable.

Extension Housing, A/T > < Control Module, A/T|Testing and Inspection|Page 2258