MX-5 Miata LS L4-1.8L DOHC (2001)
Seals and Gaskets: Service and Repair
Y16M-D Transmission
OIL SEAL (REAR) REPLACEMENT [Y16M-D]
1. Raise the vehicle and support it with safety stands.
2. Remove the propeller shaft.
Caution:
-
Do not damage the extension housing and mainshaft spline when removing the oil seal.
3. Remove the oil seal from the extension housing using a screwdriver.
4. Apply the transmission oil to a new oil seal.
5. Install the new oil seal using the SST.
6. Install the propeller shaft.
7. Inspect the oil level.
