MX-5 Miata LS L4-1.8L DOHC (2001)
Transmission Speed Sensor: Testing and Inspection
Input/Turbine
INPUT/TURBINE SPEED SENSOR INSPECTION
1. Remove the bracket and front pipe.
2. Disconnect the input/turbine speed sensor connector.
Note:
^
Resistance value input/turbine speed sensor varies with temperature. Normal resistance value occurs when the temperature is 20°C (68°F), but
it may be abnormal at high temperatures. Therefore, do not determine the resistance value only at 20°C (68°F).
3. Measure the resistance between the terminals of the input/turbine speed sensor.
^
If not correct, replace the input/turbine speed sensor.
Resistance 560 - 680 Ohms (20°C (68°F))
4. Connect the input/turbine speed sensor connector.
5. Install the front pipe and bracket.
6. Connect the negative battery cable.
