MX-5 Miata LS L4-1.8L DOHC (2001)
Window Seal: Service and Repair
Windshield Molding
REMOVAL
1. Remove the windshield molding from the windshield.
INSTALLATION
1. Apply protective tape along the edge of the body to protect it from damage.
2. Cut the sealant using a razor as shown.
3. Insert the blade of the SST (Sealant Remover) into the sealant, and pull on the bar to cut the sealant near the body as shown.
4. Insert the blade of the SST (Sealant Remover) into the sealant, and pull on the bar to cut the sealant near the glass as shown.
5. Remove as much sealant as possible from between the body and the glass.
