MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
Alarm System Transponder: Service and Repair
COIL REMOVAL/INSTALLATION
NOTE:
-
Do not remove the coil unless you are replacing it.
-
When only the coil is replaced, the immobilizer system reprogram procedure is not necessary.
1. Disconnect the negative battery cable.
2. Remove the column cover.
3. Remove in the order indicated below.
1. Connector
2. Coil
(See Coil Installation Note)
4. Install in the reverse order of removal.
Coil Installation Note
1. Install the hook 1 to the steering lock.
2. Install the hook 2 to the steering lock.
