MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
Trunk / Liftgate Latch Release Cable: Service and Repair
TRUNK LID LOCK AND OPENER REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the console.
3. Remove the rear package trim.
4. Remove the rear end mat.
5. Remove the driver's side trunk side trim.
6. Remove the trunk end trim.
7. Remove the rear bumper.
8. Remove in the order indicated in the table.
9. Install in the reverse order of removal.
10. Adjust the trunk lid.
Internal Trunk Lid Release Handle Installation Note
CAUTION: Always keep the handle firmly attached to the holder and in the recessed position. Not securing the handle this way could allow it to snag
luggage in the compartment and open the trunk lid.
