mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Floor Covering Removal/Installation|Page 3284 > < Rear Cross-Member|Service and Repair|Page 3278
Page 1
background image

Carpet: Service and Repair
Floor Covering Removal/Installation

FLOOR COVERING REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the seats.
3. Remove the dashboard.
4. Remove the heater unit.
5. Remove the front side trims.
6. Remove the rear package trims.
7. Remove the rear end mat.
8. Remove the seat belts.
9. Remove the footrest.

10. Remove the fasteners.
11. Disengage the tabs A from the body.
12. Remove the floor covering.
13. Install in the reverse order of removal.

Floor Covering Removal/Installation|Page 3284 > < Rear Cross-Member|Service and Repair|Page 3278