MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
Scuff Plate: Service and Repair
Trunk End Trim Removal/Installation
TRUNK END TRIM REMOVAL/INSTALLATION
1. Pull the internal trunk lid release handle to disengage it from the holder.
2. Remove in the order indicated below.
3. Install in the reverse order of removal.
A. Internal trunk lid release handle cover
(See Internal Trunk Lid Release Handle Cover Installation Note)
B. Fastener
C. Trunk end trim
Internal Trunk Lid Release Handle Cover Installation Note
CAUTION: Always keep the internal trunk lid release handle firmly attached to the holder and in the recessed position. Not securing the handle this
way could allow it to snag luggage in the compartment and open the trunk lid.
1. After installing the internal trunk lid release handle cover, attach the internal trunk lid release ha die to the holder on the cover and in the recessed
position.
2. Remove the trunk end trim.
3. Install in the reverse order of removal.
