mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Rear End MAT|Page 3312 > < Rear End MAT
Page 1
background image

Trim Panel: Service and Repair
Center Panel Unit Removal/Installation

CENTER PANEL REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.
2. Remove the console.
3. Remove the screws.
4. Pull the center panel, then disengage clips A and B from the body.
5. Disconnect the cigarette lighter connector.
6. Install in the reverse order of removal.

Rear End MAT|Page 3312 > < Rear End MAT