mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Cooling System|Capacity Specifications|Page 1012 > < Cooling System|Capacity Specifications|Page 1010
Page 1
background image

Coolant: Testing and Inspection

ENGINE COOLANT LEVEL INSPECTION

1. Remove the radiator cap.
2. Verify that the coolant level is near the radiator filler neck.
3. Verify that the coolant level on the coolant reservoir is between the FULL and LOW marks.

-

If the engine coolant level is below LOW, remove the radiator cap and add coolant. 

Cooling System|Capacity Specifications|Page 1012 > < Cooling System|Capacity Specifications|Page 1010