MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
3. Tighten the tensioner lock bolt.
4. Turn the crankshaft clockwise 2 and 1/6 times, and verify that all timing marks are correctly aligned.
Note:
^
For the crankshaft side, face the locating pin on the pulley boss straight up.
5. Reinspect for the belt deflection at the point indicated by applying moderate pressure 98 N (10 kgf, 22 lbs.)
Timing belt deflection 8.5 - 11.5 mm (0.34 - 0.45 inch)
6. If the timing belt deflection is not as specified, remove the timing belt and repeat from timing Belt
Pulley Lock Bolt Removal/Installation Note