MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
Evaporative Emission Control Canister: Testing and Inspection
CHARCOAL CANISTER INSPECTION
1. Remove the charcoal canister. (See FUEL TANK REMOVAL/INSTALLATION.)
2. Plug ports A and B, then blow air into port C.
CAUTION: Do not apply more than 20 kPa {150 mmHg, 16 inHg} of pressure to the charcoal canister. Doing so may break the charcoal
canister.
3. Verify that there is no air leakage when pressure of
20 kPa {150 mmHg, 16 inHg} is applied to port C.
-
If not as specified, replace the charcoal canister.