mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Fuel Tank > < Before Repair Procedure|Page 1789
Page 2
background image

1. Short the DLC terminals F/P and body GND using a jumper wire.
2. Turn the ignition switch to the ON position to operate the fuel pump.
3. Pressurize the system this way for 

at least 5 min to be sure of no leakage.

-

If there is fuel leakage, inspect for damaged fuel hoses, hose clamps, and fuel pipe sealing surface and replace if necessary.

4. After repair, assemble the system and repeat Steps 1 to 3.

Fuel Tank > < Before Repair Procedure|Page 1789