MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
Throttle Cable/Linkage: Service and Repair
After Repair Procedure
WARNING: Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. When installing the
fuel hose, observe "Fuel Hose Installation" and "Fuel Leakage Inspection" described below.
Fuel Hose Installation
1. Replace damaged or deformed fuel hoses, fuel pipes, and hose clamps.
2. When installing the fuel hose onto the fuel pipe, fit the hose onto the pipe over
25 mm {1.00 in}. When the pipe has a stopper, fit the hose until it
contacts the stopper.
3. Install a hose clamp over the fuel hose within the clamp installation range as shown, avoiding the original clamp position.
4. When installing two clamps, their tabs must be positioned
more than 45 ° (desired 180 °) apart.
Fuel Leakage Inspection
WARNING: Fuel line spills and leakage are dangerous. Fuel can ignite and cause serious injuries or death and damage. Always carry out the
following procedure with the engine stopped.
CAUTION: Connecting to the wrong DLC terminals may cause a malfunction. Carefully connect only to the specified terminals.