MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
Air Bag Control Module: Service and Repair
Deployment Authorization Procedure
AIR BAG MODULE AND PRE-TENSIONER SEAT BELT DEPLOYMENT AUTHORIZATION PROCEDURES
1. After installing a new SAS control module, verify that the air bag system warning light flashes continuously approximately 6 seconds after the
ignition switch is turned to ON position.
-
If a diagnostic trouble code is indicated, perform the appropriate AIR BAG SYSTEM ON-BOARD DIAGNOSTIC. See: Testing and
Inspection
2. Turn the ignition switch to LOCK position then back to ON position while the air bag system warning light is flashing continuously.
-
If the procedures have been performed correctly, the air bag system warning light illuminates, then goes off after approximately 6 seconds.
-
If it does not go off, perform the deployment authorization procedure again.