mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Air Bag Systems > < System Relay, HVAC|Locations
Page 1
background image

Repairs and Inspections Required After a Collision: Service and Repair

SAS Control Module

For vehicles with a single point sensor, once an air bag module is deployed due to an accident or other causes, the SAS control module must be
replaced with a new one even if the used one does not have any external signs of damage. The used SAS control module may have been damaged
internally which may cause improper operation, resulting in major injuries or even death. The used single point SAS control module cannot be
bench-checked or self-educated.

Component Reuse

Once an air bag module is deployed due to an accident or other causes, even if it does not have any external signs of damage, the air bag module may
have been damaged internally which may cause improper operation. Improper operation may cause serious injury. Always self-check the undamaged
air bag module or pre-tensioner seat belt to determine whether it can be reused.

Air Bag Systems > < System Relay, HVAC|Locations