MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
Seat Belt: Service and Repair
SEAT BELT REMOVAL/INSTALLATION
WARNING: Handling the front seat belt (pre-tensioner seat belt) improperly can accidentally deploy the pre-tensioner, which may seriously
injure you. Read SERVICE WARNINGS before handling the front seat belt. (See AIR BAG SYSTEM SERVICE WARNINGS.)
CAUTION: The ELR has a spring that will unwind if the retractor1s cover is removed. The spring cannot be rewound by hand. If this occurs, the ELR
will not work properly. Therefore, do not disassemble the retractor.
1. Disconnect the negative battery cable.
2. Remove the quarter trim. (See QUARTER TRIM REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
1. Anchor cover
2. Pre-tensioner seat belt connector
3. Seat belt
4. Bezel
4. Install in the reverse order of removal.