MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
Alignment: Service and Repair
Front Wheel Alignment
Maximum Steering Angle Adjustment
1. Remove the steering gear boot clamp.
2. Loosen the tie-rod end locknuts.
3. Turn the tie rods equally to provide the correct maximum steering angle.
4. After adjustment, tighten the locknuts to the specified torque.
Tightening torque 3 - 50 Nm (3.5 - 5.1 kgf-m, 26 - 36 ft. lbs.)
5. Adjust the toe-in.
6. Verify that the boot is not twisted, and install the boot clamp.
Caster Adjustment
Caution:
^
Adjust the caster before adjusting the camber.
1. Loosen the front and/or rear cam nuts.
1 of 2
