MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
3. Drill two 2 - 3 mm (0.08 - 0.12 inch) holes at points as shown in the figure, so that the oil can escape.
4. Turn the hole downwards.
5. The oil can be collected by moving the piston rod several times up and down and drain the oil through the hole.
6. Dispose of waste oil according to the waste disposal law.
Note:
^
Shock absorber gas is nitrogen gas.
^
Shock absorber oil is mineral oil.
Strut Tower Brace
FRONT STRUT BAR REMOVAL/INSTALLATION
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
