MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
Fluid - M/T: Testing and Inspection
Y16M-D
TRANSMISSION OIL INSPECTION [Y16M-D]
1. Place the vehicle on level ground.
2. Remove the filler plug A.
3. Verify that the oil is at the brim of the filler plug hole as shown.
-
If it is low, add the specified oil from the filler plug hole.
Specified oil
Grade: API service GL-4 or GL-5
Viscosity: SAE 75W-90 (All season) or SAE 80W-90 (Above 10°C (50°F))
4. Install the filler plug A with new washer.
Tightening torque A: 27 - 48 Nm (2.7 - 4.9 kgf-m, 20 - 35 ft. lbs.)
