MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
Seals and Gaskets: Service and Repair
Y16M-D
OIL SEAL (REAR) REPLACEMENT [Y16M-D]
1. Raise the vehicle and support it with safety stands.
2. Remove the propeller shaft.
Caution: Do not damage the extension housing and main shaft spline when removing the oil seal.
3. Remove the oil seal from the extension housing using a screwdriver.
4. Apply the transmission oil to a new oil seal.
5. Install the new oil seal using the SST.
6. Install the propeller shaft.
7. Inspect the oil level.
