MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
Window Seal: Service and Repair
REAR WINDOW MOLDING REMOVAL
Detachable Hardtop
1. Pull the rear window molding to remove it.
REAR WINDOW MOLDING INSTALLATION
Detachable Hardtop
1. Apply protective tape along the edge of the body to protect it from damage.
2. Cut the sealant using a razor as shown.
WARNING: Using a razor with bare hands can cause injury. Always wear gloves when using a razor
3. Insert the blade of the SST (Sealant Remover) into the sealant, and pull on the bar to cut the sealant near the body as shown.