MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
Windshield: Service and Repair
Windshield Molding
WINDSHIELD MOLDING REMOVAL
1. Remove the windshield molding from the windshield.
WINDSHIELD MOLDING INSTALLATION
1. Apply protective tape along the edge of the body to protect it from damage.
2. Cut the sealant using a razor as shown.
WARNING: Using a razor with bare hands can cause injury. Always wear gloves when using a razor.
3. Insert the blade of the SST (Sealant Remover) into the sealant, and pull on the bar to cut the sealant near the body as shown.
4. Insert the blade of the SST (Sealant Remover) into the sealant, and pull on the bar to cut the sealant near the glass as shown.
