MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
5. Remove as much sealant as possible from between the body and the glass.
6. Carefully clean around the edge of the glass and the adhesion surface of the body.
7. Align the edge of the protector to the spot mark.
8. Securely bond the protector to the body as shown.
CAUTION: Keep the area free of dirt and grease, and do not touch the surface or the primer may not properly bond to the surface of the glass
and body which may cause leaks to occur.
9. Apply primer onto the bonding area of the glass, body, and new windshield molding using a brush. Use only glass primer on the glass and body
primer on the body and molding. Allow the primer to dry for approximately 30 minutes.
10. Apply a 3.0 mm {0.12 in} bead of sealant between the glass and the body.