MX-5 Miata Mazdaspeed L4-1.8L DOHC Turbo (2004)
Windshield Washer Spray Nozzle: Service and Repair
WINDSHIELD WASHER NOZZLE CLEANING
1. Clean the washer nozzle by inserting and moving a needle or an equivalent tool back and forth.
-
If the nozzle becomes clogged again after cleaning, remove the hose from washer nozzle. Make sure there is enough washer fluid. Then turn
the washer switch on and flush the inside of the hose.
WINDSHIELD WASHER NOZZLE REMOVAL
1. Disconnect the windshield washer hose from the windshield washer nozzle.
2. Remove the windshield washer nozzle by squeezing the tabs.
WINDSHIELD WASHER NOZZLE INSTALLATION
1. Connect the windshield washer hose to the windshield washer nozzle.
2. Push the windshield washer nozzle into the installation hole.
3. Adjust the windshield washer nozzle.
